Metal baffle ceilings
A baffle ceiling is a run of parallel metal blades on a carrier. It screens the services above, leaves the void open for access, and holds a strong linear geometry across any floor area.
Cube and plate
Both types run on the same KRAFT carrier at 52 mm centres, so you can mix them in one design without inventing anything.
What both types share
- Material
- Galvanised steel 0.23–0.27 mm, polymer coated, to PN‑EN 13964:2014‑05
- Reaction to fire
- Euroclass A1 — non-combustible
- Warranty
- 5 years against perforating corrosion
- Carrier
- KRAFT universal carrier, spacing in multiples of 52 mm — the same for both types
- Length
- Up to 6 m. There is no stock length — blades are cut to your dimensions in the factory
- Manufacturing
- Two production plants of our own
Any RAL shade to order.
Wood texture
KRAFT blades come with a convincing KRAFT Wood texture.
Not just ceilings
KRAFT blades do not stop at the ceiling. Galvanised steel with a polymer coating handles damp and weather, so the same profile works on walls, façades and external structures.
Internal walls
Same profile, same fixings as the ceiling.
Building façades
Vertical runs have no restriction. Horizontal runs are better kept to 35 mm depth to avoid sag.
Terraces, canopies, entrances
External use. Five-year warranty against perforation corrosion.
Wet areas
Spas, pools and bathrooms. The one thing to watch is not damaging the coating during installation.
High wind loading on a façade calls for special or additional fixings.
Where a baffle ceiling works
Baffles cope with height and floor area, leave ventilation and sprinklers alone, and give you a strong linear geometry.
What we need to price it
A baffle ceiling take-off comes off the floor area and the perimeter. KRAFT does it for you, or you can run it yourself from the coefficient table.
- Ceiling area
- Perimeter length
- A drawing if you have one, so we can allow for the shape of the room
- Blade width, depth and spacing
Blades · KRAFT universal carrier · hangers
Bendable carrier · individual clips · blade splices · end caps
A KRAFT specialist prices it for your project.
Request a calculationCE marking and EU declarations of performance
KRAFT linear ceiling profiles are tested at Instytut Techniki Budowlanej, the Polish building research institute and EU notified body no. 1488. Each product carries its own declaration of performance under the harmonised standard PN‑EN 13964:2014‑05.
| Property | Value |
|---|---|
| Reaction to fire | Euroclass A1 — non-combustible |
| Durability class | B |
| Harmonised standard | PN‑EN 13964:2014‑05 |
| Notified body | Instytut Techniki Budowlanej, № 1488 |
| Assessment system | 3 |
| Regulation | (EU) No 305/2011 |
Euroclass A1 is assigned under Commission Decision 96/603/EC as a non-combustible material — no fire testing required.
Declarations of performance
Manufacturer — KRAFT Deckensysteme Poland Sp. z o.o., ul. Nowogrodzka 31/330Z, 00‑511 Warsaw. Declarations issued on 1 August 2025.
Distributors price the specification themselves in Onliner 2.0
Frequently asked questions
KRAFT makes two baffle types: a cube baffle with a U‑shaped profile, and a plate baffle with an L‑shaped one. The cube comes 35 or 88 mm wide and 35–105 mm deep. The plate is 100 mm deep. Both run on the same KRAFT carrier at 52 mm centres.
Steel. Every KRAFT baffle is galvanised steel of 0.23–0.27 mm with a polymer finish.
Six metres. There is no stock length — blades are made to order. If your dimensions are set, we cut them in the factory.
Per linear metre of cube baffle: 35×35 mm — 0.226 kg; 88×35 mm — 0.330 kg; 35×75 mm — 0.383 kg; 35×105 mm — 0.500 kg; 88×80 mm — 0.604 kg.
You need the ceiling area, the perimeter, ideally a drawing, and the blade width, depth and spacing. The basic kit is blades, the KRAFT carrier and hangers. The cube profile adds a bendable carrier, individual clips, splices and end caps.
KRAFT G‑LED, developed in house. It mounts on both cube and plate systems; with the cube profile you can also run it between the blades.
Yes — spas, pools and bathrooms, and terraces, canopies and entrances. The galvanised steel and polymer coating keep corrosion off. The one thing to watch is not damaging the coating on site.
Yes — vertically there are no limits, with a 5-year warranty against perforating corrosion. Horizontally, it is better not to use baffles taller than 35 mm.
KRAFT Deckensysteme is a manufacturer of suspended ceiling systems. The blades are made in the company's own plants and supplied from our warehouse near Warsaw. KRAFT profiles were tested by Instytut Techniki Budowlanej, EU notified body No. 1488.
A take-off for your project
Leave your details and a KRAFT specialist will price the materials for your project.