Cube baffle ceiling
The cube baffle is a U‑shaped blade running on the KRAFT universal carrier. A full range of sizes, any RAL shade, individual clips, and a bendable carrier when the run has to curve.
Width, depth, length
- Width
- 35 or 88 mm
- Depth
- 35–105 mm depending on width
- Length
- Up to 6 m, cut to your dimensions in the factory
- Profile
- U‑shaped
88 mm blade — 35, 45, 55, 65 and 80 mm deep
35 mm blade — 35, 45, 55, 65, 75, 85, 95 and 105 mm deep
- 35×35 mm
- 0.226 kg
- 88×35 mm
- 0.330 kg
- 35×75 mm
- 0.383 kg
- 35×105 mm
- 0.500 kg
- 88×80 mm
- 0.604 kg
Weights are for working out the load on the slab above.
What the spacing does
Spacing decides how much stays open between the blades and how far round you can walk before the slab above comes into view. Wider spacing means more openness and a tighter screening angle.
| Blade width | 52 mm | 104 mm | 156 mm | 208 mm |
|---|---|---|---|---|
| 35 mm | 34% | 59% | 79% | 86% |
| 88 mm | — | 21% | 47% | 65% |
| Blade depth | 52 mm | 104 mm | 156 mm | 208 mm |
|---|---|---|---|---|
| 35 mm | 63° | 28° | 17° | 13° |
| 65 mm | 75° | 45° | 35° | 28° |
| 105 mm | 77° | 56° | 40° | 37° |
The sightline angle is measured looking square on to the plane of the ceiling.
Curved runs
The KRAFT bendable carrier lets the blades follow a curve. It is a structural part — it hangs on standard wires, bends by hand on site and holds the shape it is given.
Bending the carrier outwards, the radius is not limited by the blade at all. Bending it inwards, you have to allow for blade depth and the spacing you have chosen — 52 mm as standard — or the blades foul each other. For an 88×80 mm blade the tightest radius is R375; for a 35×35 mm blade it is R150.
Planning a curved ceiling?
Work it out with usThe single clip
KRAFT's own design office developed this clip for the cube baffle at the end of 2018; it has been in production since 2019. The clip is 35×88 mm — turn it one way or the other and it takes either blade width.
- A blade anywhere on the ceiling or wall
- Blades set at different angles to each other
- Any spacing you like, free of the carrier module
- Less depth taken up: no hangers, no carrier
- A cleaner finish
- More room to design with
Splices and end caps
Connecting element
On site the blades are usually up to 4 m. On longer runs you need splices — they keep the line stiff and reading as one piece.
End cap
Where the design does without a wall angle, the blade ends get capped. The caps fix to the blade with double-sided tape.
Stock colours and textures
Any RAL shade to order.
Wood texture
Cube baffles come with a convincing KRAFT Wood texture.
Projects with cube baffles
Shopping centres, hotels, restaurants, residential schemes and façades — from the Karavan shopping centre to a residential development in Romania.
Frequently asked questions
Two widths: 35 and 88 mm. The 88 mm blade comes 35, 45, 55, 65 and 80 mm deep; the 35 mm blade comes 35, 45, 55, 65, 75, 85, 95 and 105 mm deep. Maximum length is 6 m.
The flexible carrier lets the blades follow a curve. It is a structural part: it hangs on standard wires, bends by hand and holds its shape. Bending outwards there is no radius limit; bending inwards the tightest radius is R375 for an 88×80 mm blade and R150 for a 35×35 mm one.
The single clip is an individual fixing, 35×88 mm, designed by KRAFT. It puts a blade anywhere on a ceiling or wall, at any angle, at any spacing — free of the carrier module. With it you need neither hangers nor carrier.
Spacing runs in multiples of 52 mm. Wider spacing means more openness and a tighter sightline angle — the slab above comes into view sooner. The exact figures for every combination of width, depth and spacing are in the tables above.
Blades on site are usually up to 4 m, so on longer runs splices are not optional — they are what keeps the line stiff and continuous.
Per linear metre: 35×35 mm — 0.226 kg; 88×35 mm — 0.330 kg; 35×75 mm — 0.383 kg; 35×105 mm — 0.500 kg; 88×80 mm — 0.604 kg.
Yes — vertically there are no limits, with a 5-year warranty against perforating corrosion. Horizontally, it is better not to use baffles taller than 35 mm.
Stock colours are RAL 9003 white, 9005 black, 9006 silver metallic, 7024 graphite and 8017 chocolate. Any other RAL shade is available to order, along with the KRAFT Wood textures — hickory, larch and Carini walnut.
A take-off for your project
Leave your details and a KRAFT specialist will price the materials for your project.