Recommendations for self-installation of the ceiling rail

KRAFT company produces two types of ceiling rail: cubic and plate (such as "blinds"). Both types of slats are mounted on a universal carrier traverse KRAFT. We produce two types of traverses - with a 50 mm module or a 52 mm module. Check with our managers for the current size of the module.

 

1. Fastening of hangers for bearing traverse

We make the marking of the ceiling for fixing the hangers. On the perimeter of the room we mount a wall-mounted L-profile. We fasten the hangers at a distance of 500-1000 mm. On the suspension we install bearing crossheads. Level the traverses level between each other.

2. Installing the rails

We install the rail into the right place of the ceiling and with a little effort, we press it to the traverse. The rack clicks into the fastening of the traverse.

CUBIC RAIL KRAFT CUBE

THE KRAFT CUBE RAIL CONFIGURATION FOR 1 SQ. M.

Module	mm	50 (52)	100 (104)	150 (156)	200 (208)	250 (260)	300 (312)
Rack width 35 mm	m.	20	10	6,67	5	4	3,35
Rack width 88 mm	m.	–	10	6,67	5	4	3,35
Suspension	pcs.	1,5	1,25	1,25	1,25	1	1
Traverse 4000 mm	pcs.	0,32	0,32	0,32	0,32	0,32	0,32

SCREEN CEILING FROM PLATE-SHEARED BLANK TYPE "BLINDS"

CALCULATION FOR "LOUVRES" RAILING PER 1 SQ.M OF SUSPENDED CEILING

Module	mm	50 (52)	100 (104)	150 (156)	200 (208)
"Louvres" railing	m. r.	20	10	6,67	5
Suspension	pcs	1,5	1,25	1,25	1,25
Traverse 4000 мм	pcs.	0,32	0,32	0,32	0,32

All images on the site may slightly differ from the real ones. They are similar, but not identical. Make a decision only after reading the original product samples. We reserve the right to make technical changes to all our products. Specify the technical specifications of our managers.