Installation grigliato GLK (cassette ceiling)

Recommendations for self-installation cassette ceiling grilyato

Schemes of installation

 Wall-mounted L-profile  Basic T-profile 3600 mm   Longitudinal T-profile 600 mm
 Suspensions  Transverse T-profile 1200 mm  Grigliato cassette GLK
Completion of 1 sq. m. grilyato GLK-15
Name  Module (mm)  Units of measurement 50х50 60х60 75х75 86х86 100х100 120х120 150х150 200х200
Module grigliato GLK-15 600х600 pcs. 2,78 2,78 2,78 2,78 2,78 2,78 2,78 2,78
Lower profile 600 pcs. 30,58 25,02 19,46 16,68 13,90 11,12 8,34 5,56
Upper profile 600 pcs. 30,58 25,02 19,46 16,68 13,90 11,12 8,34 5,56
End piece 600 pcs. 11,12 11,12 11,12 11,12 11,12 11,12 11,12 11,12
Main profile T-15 3600 m. 0,464 0,464 0,464 0,464 0,232 0,232 0,232 0,232
Longitudinal profile Т-15 1200 m. – – – – 1,4 1,4 1,4 1,4
Transverse profile Т-15 600 m. 2,8 2,8 2,8 2,8 1,4 1,4 1,4 1,4
Suspension step 1200  set 1,4 1,4 1,4 1,4 0,7 0,7 0,7 0,7
Wall-mounted L-profile  3000 m. 0,216 (calculated with accurate room dimensions)
What to consider when installing a grigliato GLK

1. Use only metal dowels to attach hangers;
2. The distance between the main profiles (3600 mm) should be 1200 mm;
3. The distance between the hangers should not be more than 1200 mm;
4. Any luminaires other than KRAFT LED must have a separate suspension.

Technological map of the installation of the cassette grilyato GLK 15/15

Some features of mounting grilyato GLK 15/15
1. Use special suspensions

For the supporting frame of the T-profile, use special suspensions. The installation of suspensions should be made at the intersection of T-profiles in order that the suspensions do not interfere with the installation of cassettes of GLK grilyato.

 Особенности монтажа подвесного потолка кассетный грильято GLK KRAFT
 2. Check the locks of the upper and lower profiles

After assembling the cassette, it is necessary to check that the locks of the upper and lower grilyato profiles are fully latched.
To do this, with a little effort, squeeze the bottom profile ("mother") on both sides of the lock. If the lock is not latched, then you will hear a characteristic click and the profile will fall into place.
Check all locks in the cassette.
In a properly assembled grillato cassette GLK there should be no visible gaps between the profiles.

 Особенности монтажа подвесного потолка кассетный грильято GLK KRAFT
3. Check end profile locks

The next step is to check the correctness of fastening the end profile locks.
If the lock is properly latched, then the main profile should protrude 1.5–2 mm beyond the end profile.
This gap is needed to compensate for the thickness of the T-profile.
The end profile rests on the supporting T-profile and the grilyato plane is flush with the plane of the carrying T-profile.

 Особенности монтажа подвесного потолка кассетный грильято GLK KRAFT
4. Make sure the cassette is properly secured.

Cassette grilyato should rest against the T-profile and stand on the "strut" of the supporting structure.
The cassette has a slight backlash, so after installation it is enough just to move it a little until the end profile hits the seats.

A small gap between the cassette and the T-profile is permissible at the junction points of the transverse T-profiles, since 600 mm profiles have a stamped lock.

 Особенности монтажа подвесного потолка кассетный грильято GLK KRAFT
5. Verify proper cassette placement.

To create a one-piece effect, all grilyato cassettes must be aligned in the direction of the grilyato bottom profile (“mother”).
All lower grilyato profiles should be directed parallel to the carrier T-profile.

 Особенности монтажа подвесного потолка кассетный грильято GLK KRAFT

Download PDF

All images on the site may slightly differ from the real ones. They are similar, but not identical. Make a decision only after reading the original product samples. We reserve the right to make technical changes to all our products. Specify specifications with our managers.